How To Install Toto Washlet Toilet Seat

There are many kinds of toilets out in the market with many groovy designs such every bit the popular "skirted" design. However, if yous want to install a bidet toilet seat, this pretty design may become a bothersome headache. You will soon observe that the make full valve of your skirted toilet may be inaccessible or too cramped to install a bidet seat's t-valve. Also, the mounting hardware that comes with your bidet toilet seat may non be compatible. In this particular article, we'll discuss the complications involved with installing a washlet seat on a skirted toilet and how to solve them.

What is a skirted toilet?

A skirted toilet is different from your regular toilet. A skirted toilet has a shine skirt design that conceals the trapway at the base, equally well as the make full valve nether the tank giving the toilet an elegant wait. This pattern makes the toilet easier to clean and a nice modern appearance. Although the design is peachy to look at, it does nowadays a few issues for installing a bidet toilet seat.

Skirted design toilet next to a non-skirted toilet

What are the problems with the skirted design?

Fill Valve

A typical two piece residential toilet will have its fill valve located underneath the toilet tank and easily accessible. Bidet toilet seats usually come with a 7/8" t-valve that fits directly under the tank for its water supply. Skirted toilets tend to have the fill valve concealed behind the toilet, thus making it inaccessible. There is often very little infinite between the back of the toilet and the wall. For a bidet seat, the fill up valve expanse is crucial because this is where yous connect your t-valve (or water splitter) that supplies your bidet.

Mounting Bolts

Another issue with skirted toilets is that the mounting bolts for your toilet seat are not the same equally your conventional 2 piece toilet. On a conventional toilet, the toilet seat is attached via plastic bolts that are tightened/loosened from underneath the bowl (near the trapway) with nuts. But, with a skirted design things are done a flake differently. The toilet seat is commonly secured from above the bowl using screws that fit into sleeves. Since most bidet toilet seats come with plastic bolts and basics meant for conventional toilets, this presents a problem.

Luckily, BidetKing.com has solutions for both of these issues.

What are the solutions to these pesky skirted toilet problems?

Alternative T-Valve for Skirted Toilets

The easiest solution to the fill up valve outcome is an alternative t-valve that can be installed on your shut-off valve instead of at your toilet's fill valve. Ourt-valve for skirted toilets is designed to do just that. This t-valve has top male and bottom female connections that are 3/8" compression threads, making information technology a perfect fit for well-nigh close-off valves. The tertiary outlet is a ½" piping thread that is compatible with near bidet seat hoses. I f by run a risk your bathroom has a ½" close-off valve, you will need our ½" t-valve instead.Simply install the skirted t-valve between your electric current toilet supply hose and the shut off valve on the wall.

Yet, delight exist aware that the skirted t-valve is NOT compatible with TOTO Washlets. For TOTO Washlets, yous will need an additional adapter from TOTO (THP3141), or our extension hose for skirted toilets due to TOTO's proprietary hose design.

Click here for the skirted toilet t-valve parcel.

Extension Hose for Skirted Toilets

Another solution to the fill valve problem is a simple extension hose that connects to the make full valve of your skirted toilet and extends the 7/8" connection. The extension will permit y'all to connect the bidet seat's original t-valve to the end of the hose, instead of to the fill valve directly. This is the preferred method for TOTO washlets due to their t-valve and hose design.

To install, you would disconnect your existing supply hose from underneath the tank and install this hose instead. The bidet seat's 7/8" t-valve will connect to the other cease of this extension hose, and your existing supply hose volition connect to the bottom of the t-valve. This hose tin also be used for connecting hand held bidet sprayers or non-electric bidet attachments that use seven/8" t-valves.

Click here for the extension hose.

Extension Hose for skirted toilets

Meridian Mounting Bolts

For the mounting issue, BidetKing carries top mounting hardware that tin can exist tightened from higher up every bit opposed to below the basin. The black rubber sleeves are inserted into the toilet bowl mounting holes, and the screws are and so tightened with a screwdriver from above. These would replace the plastic bolts/nuts that come with most bidet seats.

Note: in some instances, your skirted toilet may already be using height mounting bolts like these to fix your regular toilet seat. In that instance, you can simply use what you have instead of purchasing these.

Click here for the pinnacle mounting bolts.